---
title: BenQ installation instructions
slug: install-fusion-signage/benq-installation-instructions
docTags: 
createdAt: 2026-08-26T18:18:57.247Z
---

This guide explains how to set up and install the Fusion Signage application on a compatible BenQ Android display.

:::hint{type="warning"}
**Important: **BenQ screens may include two file-management applications: **Files **and **AMS Files**. You must open the Fusion Signage installation file through the standard Files app. Do not use AMS Files, as the installation file may not appear or open correctly.
:::

## Before you begin

You will need:

- A compatible BenQ Android display
- An internet connection
- The Fusion Signage Android installation file or download link
- The BenQ remote control, or a connected keyboard and mouse

## 1. Complete the initial BenQ setup

If the screen is new or has recently been factory reset, complete the Android setup first.

1. Select your preferred language, then select **Start**.
2. Connect the screen to your network.
3. When asked to copy apps and data, select **Don’t copy**.
4. Sign in with a Google account or select **Skip** if one is not required.
5. Review the Google services options and select **Accept**.
6. Review the BenQ Privacy Policy, select **Agree**, and continue through the remaining prompts.

The available options may look slightly different depending on the BenQ model and Android version.

## 2. Confirm the date and time

The correct date, time and time zone are important for content scheduling and communication with Fusion Signage.

1. Open **Settings**.
2. Select **System**.
3. Select **Date & time**.
4. Enable **Set time automatically**.
5. Enable **Set time zone automatically**, or manually select the correct local time zone.

## 3. Download the Fusion Signage app

Open **Chrome** and enter the Fusion Signage download link: [https://fus.app/a.apk](https://fus.app/a.apk)

Download the Android installation file. This will usually be an .apk file.

## 4. Locate the installation file

Once the download is complete:

1. Return to the BenQ home screen.
2. Open the app drawer.
3. Open **Files**.
4. Select **Downloads**.
5. Select the Fusion Signage .apk file.

:::hint{type="info"}
**Please check that you are using the correct app:** Open Files, not AMS Files. AMS Files is BenQ’s account-based file-management application and is not the folder required for this installation.
:::

## 5. Allow installation from Files or Chrome

Android may prevent apps from being installed outside the Google Play Store.

If prompted:

1. Select **Settings** from the warning message.
2. Find the application you used to open the file, such as **Files** or **Chrome**.
3. Turn on **Allow from this source**.
4. Return to the previous screen.
5. Select the Fusion Signage file again.
6. Select **Install**.

:::hint{type="info"}
For security, you can turn **Allow from this source** off again after Fusion Signage has been installed.
:::

## 6. If Google Play Protect blocks the installation

On some BenQ screens, Google Play Protect may display an **App blocked to protect your device** message.

Only continue if the Fusion Signage installation file was downloaded from an official link supplied by Fusion Signage or your authorised integrator.

If required:

1. Open the **Google Play Store**.
2. Select the profile icon in the top-right corner.
3. Select **Play Protect**.
4. Select the **Settings** icon.
5. Temporarily turn off **Scan apps with Play Protect**.
6. Return to the Fusion Signage installation file and try again.

:::hint{type="info"}
Once Fusion Signage has been installed, return to these settings and turn Play Protect back on.
:::

## 7. Allow Fusion Signage to display over other apps

When Fusion Signage opens for the first time, you may be taken to the **Display over other apps** settings.

1. Find **Fusion Signage**.
2. Turn on **Allow display over other apps**.
3. Return to the Fusion Signage application.

This permission allows Fusion Signage to display your content correctly and remain visible over other system applications.

## 8. Pair the screen

Fusion Signage should now open and display an identity code.

To pair it:

1. Sign in to the Fusion Signage dashboard on another device.
2. Go to **Manage** and then **Screens**.
3. Select **Add Screen**.
4. Enter the identity code displayed on the BenQ screen.
5. Complete the screen details and assign an available licence.

Once paired and published to, the screen will begin downloading and displaying its assigned content.

## Troubleshooting

If the installation file cannot be found:

- Confirm you opened **Files**, not **AMS Files**.
- Look inside the **Downloads** folder.
- Check that the download completed successfully in Chrome.
- Download the installation file again if necessary.

If Fusion Signage installs but does not display correctly:

- Confirm **Allow display over other apps** is enabled.
- Confirm the screen has an active internet connection.
- Restart the screen and reopen Fusion Signage.
- Check that the screen’s date, time and time zone are correct.

***

## Looking for something else?

We can’t wait to hear about it. Reach out to our sunshiney support and we'll be in touch in a flash.

:::CtaButton{label="Contact us" externalHref="https://www.fusionsignage.com.au/contact-us/" openInNewTab="true"}

:::