---
title: BrightSign install (SD Card)
slug: install-fusion-signage/brightsign-install-sd-card
docTags: 
createdAt: 2026-08-26T18:28:41.910Z
---

# BSN.Cloud versus SD Card

There are two methods for installing the Fusion Signage application on your BrightSign unit:

1. <u>[BSN.Cloud](https://test-support.fusionsignage.com.au/install-fusion-signage/brightsign-installation-guide-bsncloud-brightsign-installation-guide-bsncloud)</u>, or
2. Manual setup via SD Card

The preferred method is through **BSN.Cloud**, which is a free solution provided by BrightSign and enables remote management and easy updates of your BrightSign players, including provisioning the device.&#x20;

&#x20;SD Card will still work, however if you ever have to change any settings or troubleshoot the device you will need to physically access it on site.&#x20;

This page will explain how to set up your BrightSign via SD Card.

## Supported devices

- Only the latest generation of BrightSign devices are supported.
- Devices listed as legacy are **not compatible** with Fusion Signage.

:::hint{type="info"}
Steps not matching?

If these steps are out of date, refer to [BrightSigns support site](https://support.brightsign.biz/hc/en-us) and notify us at [support@fusionsignage.com.au](mailto\:support@fusionsignage.com.au)
:::

# Step 1: Preparing your BrightSign unit

Follow these steps to get your device ready:

- Connect the power adapter.
- Connect a display to the BrightSign via HDMI (or other display cables as supported).
- Connect the device to the internet through the Ethernet port.
- Ensure your SD card is cleared and formatted to FAT32 or ExFAT.

# Step 2: Download the Fusion Signage application and prepare the SD Card

Download the latest Fusion Signage application files to your computer here: <u>**[https://fus.app/b](https://fus.app/b)**</u>

- Insert the SD card into your computer
- Copy the **autorun.zip** file onto a formatted SD card (FAT32 or ExFAT).

If you need to change your default settings or rotate the screen, copy your custom settings.json to the SD card (see below)

# Step 3: Installing Fusion Signage via SD card

- Insert the SD card into your BrightSign device.
- Reboot the device.
- The Fusion Signage app will launch, displaying an identity code.
- Follow the <u>**[portal instructions](https://test-support.fusionsignage.com.au/using-fusion-signage/how-to-add-a-screen)**</u> to add and activate your device.

You're all set! Your BrightSign device is now running Fusion Signage, managed remotely via BSN.Cloud or SD card setup.

# Optional: Changing default application settings

## Default Settings

When using the standard autorun.zip file contents, the player will be configured as follows:

- Auto-update enabled.
- Signage menu appears on single click/touch.
- IP assigned via DHCP.
- Orientation set to landscape.
- Resolution: 1920 x 1080.
- Timezone is not set by default.

**Note:** you can modify settings after installation if you connect a mouse or touchscreen to access Fusion Signage settings.

## Settings.json for portrait rotation and custom configuration files (for standard series players without USB)

1. Log into the Fusion Signage portal at Settings > Player App > Configuration Settings.
2. Adjust settings as needed:
   - Enable Auto Updates (default ON; turn OFF for manual updates).
   - Enable Video Sound.
   - Enable Menu Secure Access (requires ten quick touches to access settings if enabled).
   - Screen Rotation (0°, 90°, 180°, 270°).
   - Timezone.
   - Manual Network Configuration (static IP, subnet, gateway, DNS).
3. Click Create File to generate settings.json.
4. Copy this file to your SD card alongside autorun.zip.

***

## Looking for something else?

We can’t wait to hear about it. Reach out to our sunshiney support and we'll be in touch in a flash.

:::CtaButton{label="Contact us" externalHref="https://www.fusionsignage.com.au/contact-us/" openInNewTab="true"}

:::