Philips generic install instructions

important verify with your reseller or distributor that the philips panel has the latest firmware installed to prevent issues during setup and operation using the remote use the philips remote to navigate through the setup and configuration menus initial screen setup connect the screen to power on the welcome screen use up and down arrows to select your preferred language press the right arrow and then click start for wifi network settings (optional, can be skipped and configured later) choose wifi or ethernet depending on your requirements press the right arrow to next select your wifi access point enter your wifi password (press return to open the on screen keyboard) click next signage display settings navigate to skip click setup complete and then finish prepare usb with fusion signage apk download the latest apk https //fus app/a apk https //fus app/a apk caution do not extract the apk file copy the single apk file directly to the root of your usb drive insert the usb into the philips screen note bdl4050d models are now legacy and do not support the latest app versions for these models, download version 2 3 8 from here install fusion signage on android devices use your remote to press home, 1, 8, 8, 8 to access android settings navigate to apps select file manager, then mnt, then usb storage locate the apk file ( fusion signage apk ) on the usb follow the on screen prompt to install the app once installed, press return to go back to the main menu assign fusion signage to a custom input source press home, 1, 8, 8, 8 (if not already in android settings) select settings > device > signage display under source settings, choose custom app click select app choose fusion signage click save and exit set date and time (needed for scheduling feature) press home, 1, 8, 8, 8 navigate to settings > system > date & time select time zone and configure it for bdl4150d models go to advanced options > date & time enable set auto sync = yes additional settings for bdl4150d set font size home > settings > display > font size = normal confirm setup press the source button on the remote select custom source fusion signage will launch identifier during first setup, note the 6 digit identifier shown on the screen if the identifier shows as null or no id, double check your internet connection and try again aspect ratio and screen configuration ensure the format setting is on 'full' to properly display content to add the device to the fusion signage portal log into your customer's portal navigate to deploy > add screen enter the 6 digit identifier assign a name and licence select the timezone click add how to uninstall fusion signage app press 1 8 8 8 on the remote navigate to settings under the device header, select apps select the fusion signage application select delete philips panel configuration guide set screen to automatically run fusion signage when powered on navigate to home > configuration1 > boot on source > action set input to custom enable automatic power on after power outages navigate to home > configuration1 > switch on state set switch on state to force on set screen orientation to auto rotate navigate to home > configuration2 > rotate (may be on the second page) set rotate to on (auto rotate) schedule automatic on/off times navigate to home > advanced option > schedule > action configure the on and off times according to your needs to automate screen operation tiling multiple screens for video wall configuration connect additional screens using dvi d daisy chaining as outlined in the user manual navigate to home > advanced option > tiling > action follow the manual to configure all screens for seamless video wall operation set power saving mode navigate to home > advanced option > power save select mode 3 or mode 4 depending on your power management preferences note on compatibility (v2 issues) if the latest version of our application isn't supported by your philips device, you can download the previous version (v1 0 22 apk) here important use this only if you are experiencing issues running the latest app, as version 1 0 22 does not support the newest features such as designs, templates, websites, or advanced video/image playback looking for something else? we can’t wait to hear about it reach out to our sunshiney support and we'll be in touch in a flash