BSN.Cloud versus SD Card
There are two methods for installing the Fusion Signage application on your BrightSign unit:
BSN.Cloud, or
Manual setup via SD Card
The preferred method is through BSN.Cloud, which is a free solution provided by BrightSign and enables remote management and easy updates of your BrightSign players, including provisioning the device.
SD Card will still work, however if you ever have to change any settings or troubleshoot the device you will need to physically access it on site.
This page will explain how to set up your BrightSign via SD Card.
Supported devices
Only the latest generation of BrightSign devices are supported.
Devices listed as Legacy are not compatible with Fusion Signage.
Steps not matching?
If these steps are out of date, refer to BrightSigns support site https://docs.brightsign.biz/user-guides/activate and notify us at [email protected]
Step 1: Preparing your BrightSign unit
Follow these steps to get your device ready:
Connect the power adapter.
Connect a display to the BrightSign via HDMI (or other display cables as supported).
Connect the device to the internet through the Ethernet port.
Ensure your SD card is cleared and formatted to FAT32 or ExFAT.
Step 2: Download the Fusion Signage application and prepare the SD Card
Download the latest Fusion Signage application files to your computer here: https://fus.app/b
Insert the SD card into your computer
Copy the autorun.zip file onto a formatted SD card (FAT32 or ExFAT).
If you need to change your default settings or rotate the screen, copy your custom settings.json to the SD card (see below)
Step 3: Installing Fusion Signage via SD card
Insert the SD card into your BrightSign device.
Reboot the device.
The Fusion Signage app will launch, displaying an identity code.
Follow the portal instructions to add and activate your device.
You're all set! Your BrightSign device is now running Fusion Signage, managed remotely via BSN.Cloud or SD card setup.
Optional: Changing default application settings
Default Settings
When using the standard autorun.zip file contents, the player will be configured as follows:
Auto-update enabled.
Signage menu appears on single click/touch.
IP assigned via DHCP.
Orientation set to landscape.
Resolution: 1920 x 1080.
Timezone is not set by default.
Note – you can modify settings after installation if you connect a mouse or touchscreen to access Fusion Signage settings.
Settings.json for portrait rotation and custom configuration files (for standard series players without USB)
Log into the Fusion Signage portal at Settings > Player App > Configuration Settings.
Adjust settings as needed:
Enable Auto Updates (default ON; turn OFF for manual updates).
Enable Video Sound.
Enable Menu Secure Access (requires five quick touches to access settings if enabled).
Screen Rotation (0°, 90°, 180°, 270°).
Timezone.
Manual Network Configuration (static IP, subnet, gateway, DNS).
Click Create File to generate settings.json.
Copy this file to your SD card alongside autorun.zip.