Sony Bravia Pro range install instructions

this guide walks you through installing the fusion signage application via apk on sony bravia pro range commercial screens these steps assume you have completed the initial out of the box setup simply follow the on screen prompts, ensuring your device is connected to the internet when prompted installation steps equipment required sony remote usb memory stick containing only the latest fusion signage apk (download it here https //fus app/a apk https //fus app/a apk ) active internet connection enable professional settings to proceed with the installation, your device must have pro settings enabled using the remote, press the following keys in sequence info → mute → volume up → home when successful, a blue label appears at the top of your screen saying 'pro settings in process' install the fusion signage apk insert the usb stick into the usb port on your sony bravia pro screen access the settings menu (the gear icon at the top right of the screen) go into the pro settings tab scroll down and click install apk select the apk file from the usb (it should appear as a single file if the usb was prepared correctly) press install once the installation completes, the fusion signage application will be installed on your screen the screen's identity code will briefly appear on the display additional configurations power on / off schedule please note energy saving features are active by default, and the screen will turn off after 4 hours to prevent this navigate to settings > system > power & energy select energy saver set turn off display after to never set automated schedule ensure you are in pro settings mode (refer to step 1 of installation steps) go to settings > pro settings > power scheduling toggle power scheduling to on choose power on and power off times confirm by pressing ok select your preferred run schedule – either daily or weekly set fusion signage to auto boot on screen power on ensure pro settings mode is enabled (see first step) at the top right, go to settings > pro settings scroll down to initial input source under initial source and volume select android app in the package section, enter au com fusion mediaclient in the activity section, enter au com fusion mediaclient splashactivity press ok return to pro settings and ensure fusion signage is enabled to enable pro mode (which auto boots the app on start up) go to settings > pro settings select start pro mode please note switching to pro mode will remove the pro settings watermark and allow fusion signage to auto start each time it takes about 30 seconds for the app to fully boot enable the pro mode tool in pro settings, enable the pro mode tool this adds a shortcut on the home screen for quick switching between pro mode and pro settings add app shortcuts to the homepage on the home screen, tap the + icon under favourite apps add both fusion signage and pro mode tool (if enabled) for easy access software and firmware updates automatic software updates it’s recommended to set your screen to automatically perform software updates instruction link sony support auto updates https //www sony com au/electronics/support/articles/00028577 firmware updates firmware updates are specific to your series/model (e g bz30j) find the correct instructions for your series here sony pro bravia resources https //pro bravia sony net/resources/index html looking for something else? we can’t wait to hear about it reach out to our sunshiney support and we'll be in touch in a flash