BDL5057P

Welcome to the Philips BDL5057P installation guide for Fusion Signage

caution

Before you begin The Philips BDL5057P is a commercial grade product and usually requires the assistance of a trained Reseller/Integrator in order to set up and configure. If you are an End User trying to install our application, we recommend getting in touch with your Reseller or Integrator (the company that supplied your screen) to assist you. These instructions are intended for use by a Reseller

Remote

First Setup out of the box

Select Language

1. Select Language

Security Settings

2.Security Settings

You can set these here if required or just press Skip

Network Settings

3. Network Settings

:::note The BDL5057P doesn't come with built in WiFi (adaptor sold seperately) :::

4. Set your ethernet settings

Signage Display

5. Signage Display Settings

Can be skipped unless you have settings to import

Clone Media

6. Clone Media Files into Internal

Can be skipped

Setup Complete

7. Setup Complete!

Press Finish to continue

You should see a screen like this:

Installing Fusion Signage

You will need:

• Formatted USB drive (Fat32)
• Philips Remote
• Internet connection

Download APK

1. Download our APK and copy to a USB

• Download our APK and copy to a USB
• Find a USB stick and connect it to your computer.
• Download the latest APK from here: https://fus.app/a.apk
• Copy the APK file to your USB stick
• Safely disconnect the USB stick from your computer and connect it to the USB port on the back of your panel.

caution

Do not try and run the APK file on your computer as it is an Android specific file that won't open!

Home 1888

2. Hidden Menu

On your remote you'll need to press a button sequence in order to enter the Android operating system. That sequence is:

Home 1 8 8 8

This will need to be pressed in quick succession.

note

Make sure you are pointing the remote at the screen's sensor and pressing the 1 button (as on the remote the Green button is directly above it).

You should then see this menu

File Manager

3. File Manager

USB

4. Navigate down to MNT and press Open

5. Navigate down to USB_STORAGE and press Open

APK

6. Locate the Fusion Signage APK file and press Open

tip

If your USB Storage doesn't open or isn't recognised, try

• a different USB port on the screen, or
• formatting your USB stick as FAT32

Install

7. Navigate to and click on Install

8. Once our application has been installed, press Done.

note

If you press Open here our application will run, but you have a few extra settings you need to configure first!

Android Settings

Custom App

Home 1888

1. Home 1888

• If you are already in Android settings skip this step
• Otherwise press Home 1 8 8 8 key sequence on your Philips remote to get to this screen
• Click on Settings

Custom App

2. Signage Display

Custom App

3. Custom App

Select App

4. Select App

Font Size

Home 1888

1. Home 1888

• If you are already in Android settings skip this step
• Otherwise press Home 1 8 8 8 key sequence on your Philips remote to get to this screen
• Click on Settings

Device -> Display

Go to Display under Device

Font Size = Normal

Change Font Size to Normal

tip

This is set to ensure Designs and Websites display correctly as the font size is set to Huge by default!

Date & Time

Home 1888

1. Home 1888

• If you are already in Android settings skip this step
• Otherwise press Home 1 8 8 8 key sequence on your Philips remote to get to this screen
• Click on Settings

System -> Date & Time

2. Select Date & Time under System

Timezone

Make sure to select the correct time zone for where the screen will be installed

Important:

If your time zone isn't set correctly then your scheduling won't work and you may not receive an identity code from our servers.

Running Fusion Signage

Custom Source

Press Source on your remote and select Custom

Power off/on screen

Alternatively just power your screen off/on

Fusion App

The Fusion App will be loaded on your screen!