Skip to main content

Samsung Tizen 6.5

Samsung Tizen 6.5 Installation

Supported Devices:

This guide provides images from the Samsung QB-B series running Tizen 6.5 however it should be applicable to any Tizen 6.5 based Samsung screen.

Remote

First Setup (Out of the Box)

Part 1

1. Select Language

Part 2

7. Select Custom App under Play via

Install Custom App

Finish Installing Fusion Signage

Now that you have completed the initial setup, you will have to run Fusion Signage to install our application.

  1. Press the Home button on your remote

  2. Click on Custom App in the bottom left

Adding your screen to your account

The final step is adding your screen to your account.

  • Navigate to your Deploy section in the Fusion Signage portal at https://app.fusionsignage.com.au/screens/single,
  • Click on Add Screen in the top right hand corner.
  • Enter the Identity code from your screen and
    • Give your device a name,
    • Select the available licence to associate with that screen
    • Add the time zone where the screen will be installed

The screen will be added to the account and you can now assign your content!

No identity?

If you don't see an identity here, or your device says offline, check your internet connection and your time & date settings.

Re-launching Fusion Signage

Fusion Signage will run when the panel is first turned on, however if you have closed down Fusion Signage while accessing the panel menus, you can easily get back to it in one of two ways:

Home Button

tip
  • Press Home on your remote
  • Press Fusion Signage under Custom App on the left

Source

tip
  • Press the Source button on your remote
  • Select Custom App

Additional Settings

tip

All of these settings can be reached by pressing the Menu button on your remote

Auto Power On

This will allow your device to turn on automatically if the power is turned off and on

Set Auto Power On
Steps

System -> Power Control -> Auto Power On = On

Set Time Zone

This will automatically change your time based on daylight savings

Set Time Zone
Steps

System -> Time -> NTP Settings -> Time Zone = Set to your Time Zone

Scheduled On/Off Timer

This will automatically change your time based on daylight savings

Set Scheduled On/Off Timer
Steps

Home -> On/Off Timer

Fusion Signage Settings

  1. While the Fusion Signage application is running, pressing the Enter button will bring up our Fusion Signage hidden menu. On this page you will see:
    1. Application version: 2.3.3
    2. Identity: WXPodu
    3. Device Time: 2022-09-13 12:14:44PM
    4. Files currently downloading
    5. Assigned Playlist
    6. Get Playlist button (to force download a new Playlist)
    7. Settings
  1. Pressing Settings will give you additional options for your screen
    1. Enable Auto Updates: allows our application to automatically update. Recommended to leave this on.
    2. Enable Video Sound: Turn off any audio within your video files
    3. Enable Menu Secure Access: When using touch screens prevents the menu from appearing when the screen is touched. Need to instead touch 5 times in quick succession to bring up this menu
    4. Enable Custom Screen Size: Used for LED's or odd resolution screens to set a custom resolution.

Uninstalling Fusion Signage

  1. Press the Home button on your remote

  2. Click on App Management in the bottom left